Jaw Crusher

Our company product of jaw crusher is the collection of domestic and foreign similar companys' success experiences, one kind of effectiveness, energy conservation detritus equipment which is concentrateing on study. One large and medium-sized E-crushing machine is my one of the company's leading products, particularly in the design and manufacture of large-scale E-breakers, in the domestic and international level has been at the absolute lead.Jaw Crusher is mainly used to crush kinds of mining stone primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry. This series product have complete specification . The material granularity is 125mm~750mm, which is the first choice equipment of primary stave. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.

Working Principle of Jaw Crusher:

The motor drives the mobile jaw up and down through eccentric shaft. The angle between toggle plate and mobile jaw increases when mobile jaw plate moves up. So the mobile jaw plate closes up the fixed jaw plate. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when mobile jaw moves down. The mobile jaw platmove away from stationary jaw plate with the pulling of draw rod and spring, so the crushed stuff will be discharged from the outlet. This process will repeat. The moving jaw will crush and discharge the stuff circularly.

Characteristics of Jaw Crusher:

1. The stave cavity is deep and does not have the dead area, improving the feeding ability and the output;

2. big imput material granularity, big reduction ratio, big product granularity;

3. Reliable and convenient, far adjustment scope,which increase the equipment flexibility;

4. The centralism feed lubrication method, the lubrication system is safe and reliable, the unit replacement is convenient, the capacity of maintance work is small;

5. The output mouth adjustment scope is big, which may satisfy the request of different user;

6. Low noise, few dust;

7. Conveninent maintance, low enpense, simple structure,relaible work, low operation expense;

8. Movement is stable and reliable, we have the over-load protection devices;

9. The bearing spot uses the multi-layer labyrinth craft, to lengthen the bearing service life;

10. equipment can save energy: The single plane conserves energy 15%~30%, the system conserves one time of above;

11. Wide using scope;

12. Longer curved jaw dies, a non-choking crushing action design;

13. A larger eccentric throw result in a reduction in nip angle;

14. A more positive bite, and greater ratio of reduction;

15. Our jaw can have a smaller discharge setting;

16. Allowing for a higher degree of flexibility with related equipment;

17. Positive setting adjustment is easy;

18. Manganese steel for both fixed and movable jaw faces;

19. Heavy duty fabricated plate frames, reinforced with ribs throughout;

20. Large capacity, grease lubricated, double row spherical roller bearings to ensure clean-running and long-life service;

21. Heavy flywheels allow crushing peaks on tough materials;

22. Hydraulic toggle adjusting mechanism;

23. Overload protection mechanism supplied as standard.

Technical Data:

Notice: Any change of Jaw Crushers technical data shall not be advised additionally.